Anycubic Wash & Cure 3 Plus - Advanced Size Upgrade for Enhanced Washing and Curing – ANYCUBIC-US
€ 33.99 · 4.8 (675) · In Magazzino
Di uno scrittore di uomini misteriosi
Discover the Anycubic Wash & Cure 3 Plus – an advanced washing and curing machine designed for efficient post-processing of 3D prints. This 42% size-upgraded device features a dual-layer curing platform, enhancing curing efficiency while accommodating more models per cycle. With its innovative Flexicure gooseneck lights, achieve superior curing effects for intricate model details.
Main Features Models Display Tech Specs In The BoxComparison
Anycubic Wash & Cure 3 PlusMain Features
Size Upgrade, Capacity Increased
Compared with Anycubic Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6 liters, and the total volume of the washing bucket is 12 liters, which is suitable for light-curing 3D printers of 10.6 inches and below.
At the same time, the curing size has increased by 42%, up to φ220*260 millimeters, to accommodate larger and more models for single post-processing session.
Overall Curing And Partial Enhanced
The innovative Flexicure gooseneck lights design increases the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the curing effect on details such as the top of the model and the figure's skirt.
The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. Compared to the previous generation Anycubic Wash & Cure Plus, it offers a 20% improvement in curing uniformity*. This results in a more thorough and comprehensive overall curing of the model, ensuring better quality and consistency.
Dual-Layer Design, IPA Saving
The dual-layer PP material cleaning basket supports washing with platform. It is equipped with two adjustable heights of 150 millimeters and 250 millimeters, allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
A brand-new dual-layer curing platform has been adopted, which increases the number of models cured per cycle and greatly improves the curing efficiency.
Simple Operation, Quiet and Efficient
Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Cleaning and curing time can be easily adjusted from 1 to 30 minutes at will.
Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced[1], creating a quieter and more comfortable working environment.
[1] Measured by Anycubic Laboratory the maximum sound < 65dB in the operating state of the machine.
Anycubic Wash & Cure 3 PlusModels Display
Anycubic Wash & Cure 3 PlusTech Specs
Anycubic Wash & Cure 3 PlusIn The Box
Anycubic Wash & Cure 3 PlusComparison
Features
Anycubic Wash & Cure 3 Plus
Anycubic Wash & Cure Plus
Funcion
Wash & Cure 2-in-1
Wash & Cure 2-in-1
Control Method
Multi-touch buttons
Touch Button & Control Knob
Maximum Cleaning Volume(Cleaning without platform)(Cleaning with platform)
228*128*260mm228*128*250mm
192*120*290mm192*120*235mm
Maximum Curing Size
φ220*260mm
φ190*245mm
Build Volume
312*267*434mm
290*270*479mm
Weight
5.7kg
6.5kg
UV Light
14pcs 405nm+Gooseneck Light
16pcs 405nm
Time Setting
1-30mins
1-60mins
Cleaning Mode
IPA Soaking Mode
IPA Soaking Mode
Rated Power
36W
25W
Anycubic Care+
Download
Product-related firmware, drivers, slicers, and test models.
Tutorial Videos
Product-related video guides.
Wiki
Manuals, Maintenance and Troubleshooting
ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer The Anycubic Wash and Cure 3 Plus offers higher compatibility with a larger washing size and increased washing volume, making it suitable for various LCD 3D printers. Its innovative Flexicure gooseneck light design enhances solidification in subtle areas.
ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and Ipa Saving, for ANYCUBIC Photon
Anycubic Wash & Cure 3: Refresh Your Post-Process Experience – ANYCUBIC-US
【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus's washing basket volume is increased by about 13.4%
ANYCUBIC Wash & Cure Plus 3.0, Large Size for Anycubic Mono M5s LCD MSLA SLA 3D Printer, Powerful Curing Light, Improved IPA Usage, Cleaning Volume
Anycubic Wash & Cure 3 Plus - FEPshop
ANYCUBIC Wash & Cure Plus 3.0, Large Size for Anycubic Mono M5s LCD MSLA SLA 3D Printer, Powerful Curing Light, Improved IPA Usage, Cleaning Volume 8.97''x5.03''x10.23'' : Industrial & Scientific
Anycubic Wash & Cure 3: Refresh Your Post-Process Experience – ANYCUBIC-US
【Localized Strengthening, Uniform Curing】The Innovative Flexicure Gooseneck Light Design increases the energy value by 30,000uW/cm² within a 1-3 cm
ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 2 Mars Series LCD/DLP/SLA 3D Printer Models, with
, The Anycubic Wash and Cure 3 Plus offers higher compatibility with a larger washing size and increased washing volume, making it suitable for
ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon
Anycubic Wash & Cure 3 Plus - Advanced Size Upgrade for Enhanced Washing and Curing – ANYCUBIC-UK