CarbonX CF-PETG Filament, CARBONX Filament
€ 29.99 · 4.9 (433) · In Magazzino
Di uno scrittore di uomini misteriosi
CarbonX PETG+CF is made using 3DXTECH's high-flow PETG and premium high-modulus carbon fiber. Enjoy ease of printing, an amazing surface finish, & more.
CarbonX CF-PETG is made in the USA using premium PETG and High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). CarbonX CF-PETG is an improved CF reinforced 3D printing filament vs. the competition. This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.
Benefits of CarbonX CF+PETG Filament Include:
Superior chemical resistance vs. ABS
Amorphous structure giving it low, near isotropic shrinkage
Low moisture absorption, 3x lower than ABS
Very low odor while printing
Wide processing range from 230-270°C
Chemical Resistance of PETG:
Unstressed tensile bars molded of PETG exhibit good resistance to dilute aqueous solutions of mineral acids, bases, salts, and soaps, and to aliphatic hydrocarbons, alcohols, and a variety of oils. Halogenated hydrocarbons, short chain length ketones, and aromatic hydrocarbons dissolve or swell the plastic.
Filament Specifications:
1.75mm +/- 0.05mm in diameter
Recommended Print Settings:
Extruder: 230-260°C
Bed Temp: 70-90°C
Nozzle: We currently recommend using one of our abrasion-resistant GammaMaster® Nozzles with a minimum diameter of 0.4mm.
Other: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers smaller than 0.2mm with carbon fiber reinforced filaments.
Bed Prep: Magigoo Bed Prep Adhesive gives us the best results
Heated Chamber: Not required
Supports: Water soluble AquaTek X1 USM works great for complex parts.
Drying Instructions: 65°C for 4 hours.
Abrasive Material
This carbon fiber PETG material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.
Because of this, it's strongly recommended this material be printed through a hardened steel nozzle rather than a softer metal, making our GammaMaster® Nozzles an excellent choice for this material.
Technical Data Sheets and Safety Data Sheets can be located here.
CarbonX™ PETG+CF is made using our high-flow PETG and premium high-modulus carbon fiber. This material offers ease of printing, strength & stiffness,
PETG+CF 3D Printing Filament | Carbon Fiber Reinforced PETG
Peopoly Lancer PETG-CF High Flow Filament
3DXTech CARBONX CF-PEEK Black 1.75mm 500gms - 3D FilaPrint
Most visual attractive filament - Bambu Lab X1 Series - Bambu Lab Community Forum
3DXTECH CarbonX Carbon Fiber Nylon Gen 3 1.75mm, 500G 3D Printing Filament : Industrial & Scientific
3D Printer Filaments - PLA, PETG, Carbon Fiber, PEEK, & More – Slice Engineering
CarbonX PC-CF : r/BambuLab
3DXTech CARBONX™ CF-PEKK-A [Aerospace] Black 1.75mm 500gms - 3D FilaPrint
3D Printer Filaments - PLA, PETG, Carbon Fiber, PEEK, & More – Slice Engineering
3DXTech CarbonX Black PEI+CF [ULTEM 1010] Filament - (0.5kg) 1.75mm
CarbonX™ High-Performance Carbon Fiber PC+CF 3D Printing Filament