Victron IP22 Battery Charger Blue Smart Bluetooth

Victron IP22 Battery Charger is the wireless bluetooth solution to monitor voltage and current, to change settings and to update.
Victron IP22 Battery Chargers Victron IP22 Battery Chargers are the latest professional battery charger with built-in bluetooth. The Victron IP22 Battery Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. *The IP22 does not include DC battery cables, we recommend purchasing Spartan Power 6AWG battery cable with the IP22 battery charger. *Battery cable is not included with the IP22, please check the datasheet for recommended battery cables!*   Bluetooth Smart The Victron IP22 battery charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.   High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. Once the battery is fully charged, power consumption reduces to 0.5 Watt, some five to ten times better than the industry standard.   Adaptive 6-stage charge algorithm: test -bulk –absorption-recondition–float –storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.   Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.   charges Li-ion batteries Li-ion batteries are charged with a simple bulk – absorption – float algorithm.   Fully discharged battery recovery function Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.   NIGHT and LOW setting When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.   Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.   Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.   Victron IP22 Battery Charger Part Numbers: 12V 15A (1 Output) - BPC121545102 12V 15A (3 Output) - BPC121546102 12V 20A (1 Output) - BPC122045102 12V 20A (3 Output) - BPC122046102 12V 30A (1 Output) - BPC123047102 12V 30A (3 Output) - BPC123048102 24V 8A (1 Output) - BPC240845102 24V 12A (1 Output) - BPC241245102 24V 16A (1 Output) - BPC241647102 24V 16A (3 Output) - BPC241648102

Victron Blue Smart IP22 24/16 (3) Charger 24V 16A 3 batteries

Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount

Victron Energy 12V 30A Blue Smart IP22 Battery Charger 12/30 230V With

Adaptive, auto-optimized charging: A smart Victron battery charger for your RV, campervan, boat, yacht, motorbike, workshop, or other off-grid

Victron Energy Blue Smart IP22 Battery Charger 120V NEMA 5-15 | Bluetooth (Variations)

Victron Energy Blue Smart IP22 Charger 24/16 (1)

Victron Energy - the globally renowned manufacturer of high quality hybrid power electronics. With inbuilt Bluetooth and a Lithium battery charging

Victron 30A 12V Blue Smart IP22 mains battery charger with Bluetooth (UK plug)

Victron Energy Blue Smart IP67 12-Volt 17 amp 120VAC Battery Charger with NEMA 5-15 Plug (Bluetooth) : Automotive

Blue Smart IP22 12VDC 30A 1 Bank 120V Charger – Dry Mount The Blue Smart IP22 Charger is the professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Bluetooth Smart The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

Victron Blue Smart IP22 12VDC 30A 1 Bank 120V Charger - Dry Mount

How to connect the Victron Energy Blue IP22 12/30(1) Smart Charger (AU/NZ Model) to a Battery

Victron Energy Blue Smart IP22 Battery Charger

Victron energy blue smart IP22 12v 30 amp charger