Esun PLA - LW Light Weight 3D Printer Filament 1kg 1.75mm

Features:ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.Under the same model and at the same speed, the use of lightweight PLA
Features:ePLA-LW (Lightweight PLA) is a material specially developed by eSUN for the fields of model airplanes, drones, and COSPLAY. Compared with WOOD, ePLA-LW has more stable interlayer bonding, and the foaming rate and strength can be controlled by adjusting the printing temperature. Use active foaming technology to achieve lightweight, low-density PLA parts. The foaming volume ratio is 220%, and when printing the same volume model, 1 roll of ePLA-LW can be used as 2.2 rolls of ordinary PLA. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. At around 210-270°C, this material starts to foam during printing, increasing its volume by nearly 1.2 times, and the printing extrusion rate can be reduced to 45% to print lightweight parts.Under the same model and at the same speed, the use of lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed. For models such as airplanes, under the condition of balanced strength, reducing the weight as much as possible can greatly improve the performance of the airplane. Product features:Low density, up to 0.54g/cm3The foaming volume ratio is 220%, and 1 roll of ePLA-LW is equivalent to 2.2 rolls of ordinary PLAFree adjustment of strength and foaming ratioExcellent surface effect, matte and delicateGood adhesion between layers, resistant to explosion and easy to repairEasy to paint, strong surface paint adhesionExcellent printability, large models do not warp, do not block, and do not need a constant temperature chamber

Lightweight 3d Printing Material 3d Printer Filament Material - Pla-lw 1.75mm - Aliexpress

eSUN Matte PLA Filament 1.75mm, Low Density Matte 3D Printer PLA Filament, 1KG Spool 3D Printing Filament for 3D Printer - Smith3D Malaysia

Low density & High Foaming Volume Ratio?ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest

eSUN PLA LW Lightweight 3D Printer Filament, 1.75mm 1KG Spool Strong Paint Adhesion Foaming

eSUN ePLA-LW Light Weight PLA 3D Printer Filament 1.75mm 1kg - ZENIX Store LLC

eSUN Luminous PLA 1.75mm 3D Filament 1KG Glow in the Dark – eSUN Offical Store

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.

eTwinkling 1.75mm PLA Pink Filament - 1kg Spool

ePLA-LW Light Weight PLA Filament eSUN 3D Printer Filament

Low density & High Foaming Volume Ratio?ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest

eSUN PLA LW Lightweight 3D Printer Filament, 1.75mm 1KG Spool Strong Paint Adhesion Foaming

eSUN 3D Printer Filament PLA+ 1.75mm Dimensional Accuracy +/- 0.03mm 1KG (2.2 LBS) Spool 3D Printing Material For 3D Printers - AliExpress