eSun PETG Filament - ThinkRobotics –
€ 0.99 · 4.9 (719) · In Magazzino
Di uno scrittore di uomini misteriosi
Enhance Your 3D Printing With eSun PETG Filament. High-Strength PETG For Precise And Reliable Prints. Available At ThinkRobotics.
PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has translucent and smooth surface. It’s easy to print as PLA without temperature chamber.
Features:
- Translucent
- Tough
- High Chemical Resistance
- Water Resistant
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | PETG |
Density(g/cm3) | 1.27 |
Heat Distortion Temp(℃,0.45MPa) | 64 |
Melt Flow Index(g/10min) | 20(250℃/2.16kg) |
Tensile Strength(MPa) | 52.2 |
Elongation at Break(%) | 83 |
Flexural Strength(MPa) | 58.1 |
Flexural Modulus(MPa) | 1073 |
IZOD Impact Strength(kJ/㎡) | 4.7 |
Durability | 8/10 |
Printability | 9/10 |
Recommended printing parameters |
|
Extruder Temperature(℃) | 230 – 250℃ Recommended temperature:240℃ |
Bed temperature(℃) | 75 – 90°C |
Fan Speed | 100% |
Printing Speed | 40 – 100mm/s |
Heated Bed | Required |
Recommended Build Surfaces | Masking paper, PVP solid glue |
Feature | |
Flexible | —— |
Elastic | —— |
Impact Resistant | —— |
Soft | —— |
Composite | —— |
UV Resistant | —— |
Water Resistant | √ |
Dissolvable | —— |
Heat Resistant | —— |
Chemically Resistant | √ |
Fatigue Resistant | √ |
Need drying | —— |
Heated Bed Required | √ |
Print recommend | Drying at 65℃/>3h |
PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has translucent and smooth surface. It’s easy to print as PLA without temperature chamber. Features: Translucent Tough High Chemical Resistance Water Resistant Filament Properties Table 3D PRINTING FILAMENT PETG Density(g/cm3) 1.27 Heat Distortion Temp(℃,0.45MPa) 64 Melt Flow Index(g/10min) 20(250℃/2.16kg) Tensile Strength(MPa) 52.2 Elongation at Break(%) 83 Flexural Strength(MPa) 58.1 Flexural Modulus(MPa) 1073 IZOD Impact Strength(kJ/㎡) 4.7 Durability 8/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 230 – 250℃Recommended temperature:240℃ Bed temperature(℃) 75 – 90°C Fan Speed 100% Printing Speed 40 – 100mm/s Heated Bed Required Recommended Build Surfaces Masking paper, PVP solid glue Feature Flexible —— Elastic —— Impact Resistant —— Soft —— Composite —— UV Resistant —— Water Resistant √ Dissolvable —— Heat Resistant —— Chemically Resistant √ Fatigue Resistant √ Need drying —— Heated Bed Required √ Print recommend Drying at 65℃/>3h
eSun PLA + Filament - ThinkRobotics –
eSUN PETG Filament 1.75mm, 3D Printer Filament PETG, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Orange : Industrial & Scientific
eSUN PETG Refill is a filament without a spool. The filament can be rolled onto a reusable spool and is compatible with eSUN's eSpool, This solution
eSun Refillable PETG Filament (1kg)
eSUN High Speed Upgraded PETG Filament 1.75mm, High Toughness 3D Printer Filament Speedy PETG for Fast Printing, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Solid Grey : Industrial
eSUN PETG Refill is a filament without a spool. The filament can be rolled onto a reusable spool and is compatible with eSUN's eSpool, This solution
eSun Refillable PETG Filament (1kg)
PETG is a fantastic material and has combined advantage of both PLA and ABS. This listing is for all 1.75mm PETG, For detailed spec, please refer
eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm
Best PETG Filament 2022 3D Printer PETG Materials eSUN3D
eSun eBOX Lite 3D Printing Filament Storage And Dryer - ThinkRobotics –
eSUN PETG 1.75mm 3D Filament 10PCS – eSUN Offical Store
eSUN PLA+ Grey 1.75mm 1Kg 3D Printing filament - 3D FilaPrint, esun